Rss Feed Tweeter button Facebook button Technorati button Reddit button Myspace button Linkedin button Webonews button Delicious button Digg button Flickr button Stumbleupon button Newsvine button

Honda CBR600F4i 01 02 03 Electrical, Ignition, Starter, Cooling Specification

PopGuy | July 26th, 2011 - 12:40 AM

CBR600F4i 2001 2002 2003 Expertise Specification includes Spark Plug Model, Ignition Coil Resistance and Timing, Starter Brush, Coolant Capacity and Antifreeze, Thermostat Temperature.

Honda CBR600F4i 2001 2002 2003 Electrical System Information:

CBR600F4i 01 02 03 Ignition system isComputer-controlled digital transistorized with electric advance,
CBR600F4i 01 02 03 Starting system isElectric starter motor,
CBR600F4i 01 02 03 Charging system isTriple phase output alternator,
CBR600F4i 01 02 03 Regulator/rectifier isSCR shorted or triple phase, full wave rectification,
CBR600F4i 01 02 03 Lighting system isBattery,

Honda CBR600F4i 2001 2002 2003 Ignition and Starter System Information:

CBR600F4i 01 02 03 Spark plug (Iridium) NGK isIMR9A-9H,
CBR600F4i 01 02 03 Spark plug (Iridium) Denso isIUH27D,
CBR600F4i 01 02 03 Spark plug gap is0.80 mm – 0.90 mm (0.031 inch – 0.035 inch),
CBR600F4i 01 02 03 Ignition coil peak voltage is100 V minimum,
CBR600F4i 01 02 03 Ignition pulse generator peak voltage is0.7 V minimum,
CBR600F4i 01 02 03 Ignition timing (“F” mark) is13° BTDC at idle,
CBR600F4i 01 02 03 Starter motor brush length is12.0 mm – 13.0 mm (0.47 inch – 0.51 inch),

Honda CBR600F4i 2001 2002 2003 Cooling System Specification:

CBR600F4i 01 02 03 Coolant capacity Radiator and engine is2.7 liter (2.9 US qt, 2.4 Imp qt),
CBR600F4i 01 02 03 Coolant capacity Reserve tank is0.31 liter (0.33 US.qt, 0.27 Imp.qt),
CBR600F4i 01 02 03 Radiator cap relief pressure is108 kPa – 137 kPa (1.1 – 1.4 kgf / cm2, 16 – 20 psi),
CBR600F4i 01 02 03 Thermostat Begin to open is80 °C – 84 °C (176 °F -183 °F),
CBR600F4i 01 02 03 Thermostat fully open is90 °C (194 °F),
CBR600F4i 01 02 03 Thermostat Valve lift8 mm (0.3 inch) minimum,
CBR600F4i 01 02 03 Standard coolant concentration is1:1 (mixture of antifreeze and soft water),
CBR600F4i 01 02 03 Recommended antifreeze isPro Honda HP Coolant or an equivalent high quality ethylene glycol antifreeze containing corrosion protection inhibitors,